incubator

[snakeyes]

hello, i put my beardies together one week ago. i no how long it takes for them too hatch but i want to no how to make an incubator. if anyone now let me no. cya

[tHeGiNo]

This is a fairly simple method of building an incubator:

1. Take a styrofoam box or cooler and place a pickle jar in it. Inside the jar, place a fish tank heater.
2. Fill the pickle jar with water, and keep it filled.
3. Play around with the temperature gauge on the heater to adjust the temperature (it should be 83° - 85°F).
4. Once the temperature is set correctly, place the container of eggs in the box.

Be sure to check the water level often, and make sure the temperature is where it should be. You may want to use a digital thermometer for the most accurate results. and be sure to check the temperatures with a digital thermometer because you want it to be accurate. It is important to set the temperatures before placing the eggs in, and before the eggs are laid.

[K1LOS]

will the water evaporating from the pickel jar make the incubator humid enough? What is the correct humidity for beardie eggs?Thanks

Geoff