RHP and setup advice please

[LarryS]

That looks very nice! Anxious to see it with inhabitant and furnishings.

[Schriztopher]

Originally Posted by LarryS

That looks very nice! Anxious to see it with inhabitant and furnishings.

Thanks

So when I set up my RHP & thermostat should the probe just be sitting in the bedding underneath the warm hide? Or should it just hang on the back wall near the substrate?

[Schriztopher]

RHP made it here this morning from Boaphile.com - here it is installed

Will be adding pics as I add furniture today, thanks for looking

[Terranaut]

Originally Posted by Schriztopher

RHP made it here this morning from Boaphile.com - here it is installed

Will be adding pics as I add furniture today, thanks for looking

Please tell me you have the viv upside down?
If not.....pssssst. The rhp goes on the ceiling

[dbank999]

Originally Posted by Terranaut

Please tell me you have the viv upside down?
If not.....pssssst. The rhp goes on the ceiling

I thought the same thing when I saw it, but it definitely is easier to mount upside down


+1 for the Reptile Basics... They ship their RHP's with the wiring left for you to finish (real simple t-tap style plug, takes 5 seconds to clip together) this way you don't have to drill a large hole to accomadate for getting the plug through.

Although you made good use of those electrical port covers used for computer wiring very nicely..

Good job!

[Schriztopher]

Originally Posted by dbank999

I thought the same thing when I saw it, but it definitely is easier to mount upside down


+1 for the Reptile Basics... They ship their RHP's with the wiring left for you to finish (real simple t-tap style plug, takes 5 seconds to clip together) this way you don't have to drill a large hole to accommodate for getting the plug through.

Although you made good use of those electrical port covers used for computer wiring very nicely..

Good job!

Thanks, and yeah it is upside down lol. I wish I had gone with Reptile Basics for that reason =/. I thought about disassembling the power cord from the base for that exact reason but didn't want to break anything. Oh well, it's starting to come together. Here's another pic. Still have to add another plant, hides, water dish, and run the thermostat probe.