Thread: UTH question
View Single Post
Old 05-14-18, 11:57 AM   #4 (permalink)
Wildernessmedic
Member
 
Wildernessmedic's Avatar
 
Join Date: Apr-2018
Location: California
Posts: 23
Country:
Re: UTH question

Yes I’m using my hand to check. But on the inside over bare glass I can tell the glass is still cool to the touch. It’s secured flush with the bottom(no sagging it all touches). There’s no way this will work even with no substrate.

Can anyone recommend one that will get 100-105? Im using a good thermostat. I don’t see the point of a good thermostat if the thing never gets to a suitable temp anyway.


Maybe I expected too much from UTH? Do I still need a heat lamp to get the temp up inside? I figured it would be hot enough to raise the temp of one half of it to suitable levels after leaving it on to equalize the ambient temp after a while.

Last edited by Wildernessmedic; 05-14-18 at 12:02 PM..
Wildernessmedic is offline   Reply With Quote