Thread: Regurg
View Single Post
Old 04-21-18, 05:05 PM   #7 (permalink)
Join Date: Feb-2018
Posts: 210
Re: Regurg

Originally Posted by bigsnakegirl785 View Post
The UTH is enough, that CHE sounds like way too much heat, and high temps can certainly cause a regurge.

You can also try setting the CHE lower so that it's putting off less heat. I'd aim for a surface temp no higher than 85-87F and ambients no higher than 80-81F (directly under the lamp).
I don't have a lamp on this viv because I was told that BRBs don't need supplemental lighting or UVB. I just have the 40w CHE on a lamp stand. It only raises the ambient temp 4 degrees above room temp. My ambient temp is 78 degrees during the day.
phenyx is offline